Leds, Lan port leds, Figure 5: lan port leds – Allied Telesis AT-iMG606BD User Manual
Page 23: Table 2: lan port led descriptions
Advertising
AT-iMG606BD Multiservice Gateway Installation Guide
23
LEDs
The AT-iMG606BD Multiservice Gateway has two LEDs for
each LAN port and three LEDs for the unit as a whole.
LAN Port
LEDs
Each LAN port has two LEDs as shown in Figure 5.
Figure 5. LAN Port LEDs
Table 2 describes the LAN port LEDs.
381
LAN 1
LAN 2
LA
Link/Activity
Duplex
Table 2. LAN Port LED Descriptions
LED
State
Description
Link/Activity
Off
The port has not established a link with an end
node.
Blinking
The port is transmitting or receiving data.
On
A valid link has been established on the port.
Duplex
Off
The port is operating in half-duplex mode.
On
The port is operating in full-duplex mode.
Advertising