Chapter 31, Mac address-based vlan commands, Chapter 31: mac address-based vlan commands – Allied Telesis AT-S63 User Manual
Page 533
Advertising
533
Chapter 31
MAC Address-based VLAN Commands
This chapter contains the following commands:
“ADD VLAN MACADDRESS” on page 534
“ADD VLAN PORT MACADDRESS” on page 535
“CREATE VLAN TYPE=MACADDRESS” on page 536
“DELETE VLAN MACADDRESS” on page 538
“DELETE VLAN PORT MACADDRESS” on page 539
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
This feature is not supported on the AT-9408LC/SP, AT-9424T/GB,
and AT-9424T/SP switches. For background information, refer to
Chapter 28, “MAC Address-based VLANs” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising