Show enco – Allied Telesis AT-S63 User Manual
Page 656
Advertising
Chapter 36: Encryption Key Commands
656
Section IX: Management Security
SHOW ENCO
Syntax
show enco key=[
key-id
]
Parameters
key
Specifies the ID of a specific key whose information
you want to display. Otherwise, all keys are displayed.
Description
This command displays information about encryption key pairs stored in
the key database. This command displays the following information about
each key:
ID
Algorithm
Length Digest
Description
Example
The following command displays the information on encryption key 1:
show enco key=1
Advertising