Allied Telesis AT-VIEW PLUS 3.2 AMIGO - Manual (Page 25)

Allied Telesyn AT-VIEW PLUS
AMIGO
3.3.8 Set MIB Value Button
: sets values in the MIB Value column for the variables checked in the
checkbox column.
Note - SNMPv3: Depending on the WRITE VIEW access settings of the User
Account Name used, there is a possibility that Amigo may not be able to set some
MIB values. When this happens, a "No access error." value will be displayed on
the affected MIB Value cells.
Note - SNMPv3: When a Set operation is performed using a user account that has
No Read access but has Write access to the target MIB variable, the error
message, "No access error." is displayed but the new value is still saved on the
device.
3 Main Window
PN 613-50662-00 Rev B Page 25 of 48