Allied Telesis AT-VIEW PLUS 3.2 AMIGO - Manual (Page 8)

Allied Telesyn AT-VIEW PLUS
AMIGO
SetCommunity
SNMP Set community string. This is used to modify MIB values.
UserName
User account name to be used for accessing the MIB. This is required
when using SNMPv3.
SecLevel
Security level that is configured for the User Name. This is required when
using SNMPv3.
AuthProtocol
Authentication protocol that is configured for the User Name. This is
required when using SNMPv3.
AuthPassword
Authentication password that is configured for the User Name. This is
required when using SNMPv3.
PrivProtocol
Privacy protocol that is configured for the User Name. This is required
when using SNMPv3.
PrivPassword
Privacy password that is configured for the User Name. This is required
when using SNMPv3.
xxx.amg file
The name of the AMIGO configuration file. This has the extension .amg.
Note - If a configuration file is specified along with the other parameters, the
contents of the configuration file will take precedence.
PN 613-50662-00 Rev B Page 8 of 48