Destroy snmpv3 notify, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 329: Description, Examples
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
329
DESTROY SNMPv3 NOTIFY
Syntax
destroy snmpv3 notify=
notify
Parameter
notify
Specifies an SNMPv3 Notify Table entry.
Description
This command deletes an SNMPv3 Notify Table entry. After you delete an
SNMPv3 Notify Table entry, you cannot recover it.
Examples
The following command deletes an SNMPv3 Notify Table entry called
“systemtestnotifytrap.”
destroy snmpv3 notify=systemtestnotifytrap
The following command deletes an SNMPv3 Notify Table entry called
“engineeringinform1.”
destroy snmpv3 notify=engineeringinform1
Advertising