Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT - Manual (Page 15)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
LED status
In AT-View Plus Device Manager, LEDs do not blink. The meanings of LEDs differ between
devices.
Utilization
Utilization is calculated by the following formula.
# of frames x (96 + 64) + octets x 8
Utilization (%) = ------------------------------------------- x 100
Port speed (bps) x Sampling Interval(sec)
Device-Specific Menu Items
When using SNMPv3, some device-specific menu items may not be available (disabled)
depending on the READ VIEW access settings of the User Account Name used.
Basic Operations
PN 613-50665-00 Rev B Page 15 of 277