At-ar022, At-ar023, At-ar024 – Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT User Manual
Page 269: At-ar026, At-ar027, At-ar022 at-ar023 at-ar024 at-ar026 at-ar027

Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
LED
State
Description
B1 and B2 Green
Gray
For permanent circuits, HDLC packets are being exchanged
between the switch or router and another end system device
(normally another switch or router) over any of the B channel.
For on-demand ISDN, there is a call up over the respective B-
channel.
No packet/data transmission over B-channel.
AT-AR022
Note
- There are no LEDs on this PIC.
AT-AR023
Note
- There are no LEDs on this PIC.
AT-AR024
Note
- There are no LEDs on this PIC.
AT-AR026
Device Manager LEDs for AT-AR026
LED
State
Description
DUPLEX Green
The port is operating at full-duplex.
Note
- The four physical ports in this PIC are configured and behave as one ETH port from the
viewpoint of the software running on the device.
AT-AR027
PN 613-50665-00 Rev B
Page 269 of 277