Allied Telesis AT-GS905 - Manual (Page 25)

AT-GS905 Gigabit Ethernet Switch Installation Guide
25
Unpacking the Switch
To unpack an AT-GS905 switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your
switch package. If any item is missing or damaged, contact your
Allied Telesyn sales representative for assistance.
‰ One AT-GS905 Gigabit Ethernet Switch
‰ External AC/DC power adapter
‰ Four rubber protective feet
‰ Two drywall anchors
‰ Two mounting screws
‰ This installation guide
‰ Warranty card