Using the switch on a desktop – Allied Telesis AT-GS905 User Manual
Page 26
Advertising
Installation
26
Using the Switch on a Desktop
The AT-GS905 switch can be used on a desktop or mounted onto the
wall. To wall-mount the switch, refer to Wall- Mounting the Switch on
page 27.
To use the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Attach the four rubber protective feet (provided) to the bottom of
the switch as shown in Figure 5.
Figure 5 Attaching the Rubber Feet
3. Turn the switch over and place it on a flat, secure surface (such as a
desk or table), leaving ample space around the unit for ventilation.
A T-GS905
10/100/1000 Base-
T Gigabit Ethernet Switc
h
POWER
1
2
3
4
5
100M
1000M
LNK/ACT
FDX
2
3
4
1
5
Advertising