Selecting a site, Reviewing safety guidelines – Allied Telesis AT-FS217 User Manual
Page 21
AT-FS21x and AT-FS212/x Series Installation Guide
9
Note
Refer to page 18 for additional fiber optic port specifications.
Selecting a Site
Be sure to observe the following requirements when choosing a site for your
switch.
❑
Select a site that is dust-free and moisture-free.
❑
Be sure that the site will allow you to easily access the fiber optic and
twisted pair cables and the power cord.
❑
Use dedicated power circuits or power conditioners to supply reliable
power to the device.
Reviewing Safety Guidelines
Please review the following safety guidelines before you begin to install the
media converter.
Laser
Class 1 laser device.
!
7
Laser
Do not stare into the laser beam.
!
8
Warning
Electric Shock Hazard: To prevent electric shock, do not remove the
cover. There are no user-serviceable parts inside. The unit contains
hazardous voltages and should only be opened by a trained and
qualified technician.
!
9
Warning
Lightning Danger: Do not work on this equipment or cables during
periods of lightning activity.
!
11