Allied Telesis AT-FS705LE - Manual (Page 28)

Installation
16
Note
For wall-mount installation, the screws,
plastic anchors, and any other material
necessary to physically mount the switch
to the wall are not provided.
Selecting a Site
Be sure to observe the following requirements
when choosing a site for your switch.
❑ Make sure you are placing the switch in a
dust-free and moisture-free environment.
❑ Do not block the ventilation openings on
the unit. Allow at least 10 centimeters (4
inches) of space at the front and back of
the unit for ventilation.
❑ Make sure that the switch’s power is
accessible and cables can be connected
easily.
❑ Cabling should be away from sources of
electrical noise such as radios,
transmitters, broadband amplifiers,
power lines, and fluorescent fixtures.
❑ Do not place objects on top of the switch.
❑ Use dedicated power circuits or power
conditioners to supply power to the
switch.