Allied Telesis AT-8550 - Manual (Page 16)

Access Policy Commands
14
Access Policy Commands
Command Description
config access-profile <access_profile> add
{vlan <name> | ipaddress <ipaddress>
<subnet_mask> Adds an IP address or VLAN name to the access profile. The entry
must be of the same type as the access profile (for example, IP
address).
config access-profile <access_profile> delete
{vlan <name> | ipaddress <ipaddress>
<subnet_mask> Deletes an IP address or VLAN name from the access profile.
config access-profile <access_profile> mode
[permit | deny] Configures the access profile to be one of the following:
❑ permit — Allows the addresses that match the access profile
description.
❑ deny — Denies the addresses that match the access profile
description.
The default setting is permit .
create access-profile <access_profile> type
[vlan | ipaddress] Creates an access profile. Once the access profile is created, one or
more addresses can be added to it, and the profile can be used to
control a specific routing protocol
delete access-profile <access_profile> Deletes an access profile.
show access-profile <access_profile> Displays access-profile related information for the switch.