Preparing the site, Preparing the site -3 – Allied Telesis AT-3726 User Manual
Page 21
AT-3714F and AT-3726 Installation Guide
2-3
Preparing the Site
Make sure that you follow common sense installation site
requirements and observe the following:
❑
Make sure that the switch’s power is accessible and cables can
be connected easily.
❑
Cabling should be away from sources of electrical noise such
as radios, transmitters, broadband amplifiers, power lines, and
fluorescent fixtures.
❑
Air flow around the switch and through its vents in the side
and rear cannot be restricted.
❑
If you are desk mounting the switch, make sure the switch is
placed on a level, secure desktop.
❑
Do not place objects on top of the switch.
❑
Do not expose the switch to moisture or water.
❑
Make sure it is in a dust-free environment.
❑
Use dedicated power circuits or power conditioners to supply
power to the network devices.