Allied Telesis AT-3726 - Manual (Page 23)

AT-3714F and AT-3726 Installation Guide
2-5
3. Attach the rack-mounting brackets to each side of the switch, using
the 6 flathead screws provided.
Figure 2-2 Attaching Rack-Mounting Brackets
4. Mount the unit in the rack.
5. Apply power to the unit as follows:
Caution
Power cord is used as a disconnection device. To de-energise equip-
ment disconnect the power cord.
A-10
Attach the power cord to the unit and plug it in the wall outlet.
Verify that the PWR LED lights green. See Table 2-1, LEDs
OR PORT
RS-232 TERMINAL
PORT
STATUS
RESET
K
FAUL
T
POWER