Allied Telesis AT-8203 - Manual (Page 13)

AT-8202 and AT-8203 Installation Guide
7
Figure 5: Cover Plate Removal
7. Install the uplink card into the
lower PCI slot
(Figure 6).
Ensure that the uplink card is fully seated in the
lower PCI slot
.
Align the back edge of the board in the card guide as you are installing
it.
Figure 6: Uplink Card Insertion
Caution
The uplink card will not function if it is installed into the upper PCI
slot. The upper PCI slot is intended for the accelerator card only.