Using the screw from step6, secure the uplink, Proceed immediately to the next sections to ins – Allied Telesis AT-8203 User Manual

Page 14

Advertising
background image

Installing the Uplink Card

8

8.

Using the screw from Step 6, secure the uplink card to the chassis

(Figure 7).

Figure 7:

Uplink Card Attachment to Chassis

9.

Proceed immediately to the next sections to install the accelerator

card, replace the cover, and then re-initialize the switch.

Advertising
This manual is related to the following products:
See also other documents in the category Allied Telesis Computer hardware: