Allied Telesis AT-S68 - Manual (Page 31)

AT-S67 and AT-S68 User’s Guide
31
4. Type 1 to select Trunk Group. One of the following prompts will be
displayed:
For an AT-FS7016 switch:
Select Trunk Group [1-8] ->
For an AT-FS7024 switch:
Select Trunk Group [1-12] ->
5. Type the number of the trunk group you wish to delete and press
<Enter>.
The Delete Trunk Menu will be displayed showing the values for
the Trunk Group, Chip No, and Ports.
6. Type D to select Delete Trunk. The following prompt is displayed:
Are you sure you want to delete this Trunk Group
(Y/N) ->
7. Type Y for yes to delete the port trunk or N for no to cancel this
procedure.
8. Type S to select Save Configuration Changes.
The port trunk has been deleted.