Allied Telesis AT-S68 - Manual (Page 89)

89
Appendix A
AT-S67 and AT-S68 Default
Settings
This appendix lists the factory default settings for the AT-S67 and AT-S68
version 1.0.0 management software.
Parameter Default Setting
Port Configuration
TX/TX TX/RX Enabled
Flow Control Enabled
Auto Negotiation Enabled
Port Mirroring
Destination Mirror Port None
Source Mirror Port (RX Data Only) None
Source Mirror Port (TX Data Only) None
Source Mirror Port (TX/RX Data Both) None
Advanced Mirror Configuration (TX/RX Data)
Mirror Filter Mirror All Frames
Mirror MAC Address 00-00-00-00-00-00
Mirror Divider Disabled
Port Trunking
Port Group No trunk groups