Allied Telesis AT-S26 - Manual (Page 25)

AT-S26 Version 2.0.1 User’s Guide
25
Using the
Terminal
Interface
This section explains how to move around the menus using different
terminal interfaces.
If you are using a DEC VT100 or ANSI (the default) terminal configuration,
refer to the table below for instructions on how to move through and
select menu selections:
When directed to You must
Select an option Highlight the option by pressing the Up (
↑
)
or Down (
↓
) arrow key; then press <Return>
or
Type the first character of the desired option
at the prompt and press <Return>.
If two or more options have matching initial
characters, type the initial characters until the
option you want is highlighted; then press
<Return>.
Enter information (for
example, the IP
address of a switch) Type the information and press <Return>.
Return to the previous
screen Select the “Return” option at the bottom of
the menu
or
Press <Esc>.