Allied Telesis AT-S26 - Manual (Page 26)

Getting Started
26
The table below shows you how to move through and select menu
selections if you are using a generic (dumb) terminal configuration:
Activated options in menus are preceded with a > symbol. In the
following example, the first option is activated:
> Enable this port
Disable this port
When you press <Return> to select a field in which you can enter a value,
the -> symbol is displayed. For example:
System name: ->
The -> symbol indicates that you can enter a new value for the
parameter or change the existing value. Once you have entered a value,
press <Return>. To delete an existing value to a parameter without
assigning a new value, type a space and press <Return>. Parameter
changes are activated on the switch immediately.
When directed You must
To select an option Type the first character of the option you
want and then press <Return>.
If two or more options have matching initial
characters, type enough characters for
Omega to distinguish your choice from the
other options; then press <Return>. To
guide you, the characters you must type are
in uppercase.
For example:
Mirroring configuration
MAC Address Table
If options on a list are preceded by numbers
(1:, 2:, 3:, etc.) or letters (A:, B:, C:, etc.), type
the number or letter corresponding to your
choice at the prompt; then press <Return>.
To enter information
(for example, the IP
address of a switch) Type the correct information at the prompt
and press <Return>.
To return to the
previous screen Press <Return> after making an entry.