Allied Telesis FastHub16 - Manual (Page 10)

Product Description
4
Uplink Switch. The slide switch located on the right side of the back panel is for
the uplink function. To use Port 8 as an Uplink port, manually set the switch
to the “Uplink” position. This eliminates the need for a crossover cable when
connecting directly to another hub.
Power Connection. For compatibility with electric service in most areas of the
world, the hub two-piece power adaptor automatically adjusts to line power
range 100~220 VAC and 50~60 Hz. Per ordering option, a country specific
power receptacle cord is also supplied with your hub.