Allied Telesis FastPrint Server User Manual
Page 58
Chapter 7. Windows Peer-to-Peer
Software configuration
FastPrint Server User’s Guide
48
3. Choose the Printer Model on the FastPrint Server’s first port.
4. Select PrintServer as the port in the Select Port screen.
5. Select the Configure Port button. The following Configure FastPrint Server screens
show both the TCP/IP and NetBEUI windows.
Figure 5 TCP/IP Configuration (Win95 PtP)
Figure 6 - NetBEUI Configuration (Win95 PtP)
6. Enter the configuration information as detailed in Software configuration on page 47.
7. Follow the on-screen instructions to finish adding a printer as you normally would.
7.5.2.2. Configuring additional ports
To add additional ports and printers, follow the steps below.
1. Go to the Printers folder and click on the printer just added. Then select
FileèProperties. The Properties screen will appear.
2. Select the Details tab and the following screen will appear: