Allied Telesis AT-S24 - Manual (Page 93)

AT-S24 Version 2.01 User’s Guide
93
Adding Addresses
to the Static MAC
Address Table
To add MAC addresses to the static MAC address table, perform the
following procedure:
1. Compile a list of the MAC addresses of the devices to be added to the
table.
Note
You can assign only one static MAC address per port on the switch.
2. From the Omega Main Menu, select MAC Address Table.
The MAC Address Table menu shown in Figure 38 on page 87 is
displayed.
3. Select Per port static MAC addresses.
A list of the ports on the switch is displayed.
4. Select the port where you want to add the static MAC address.
The window in Figure 45 is displayed. The window lists the static
addresses already defined for the selected port.
Figure 45 Static MAC Addresses Per Port Window
5. Select Add MAC Address.