Allied Telesis AT-S39 - Manual (Page 148)

Section II: Local and Telnet Management
148
Deleting a VLAN
Note
To perform this procedure, you must know the VID of the VLAN that
you want to delete. To view a VLAN’s VID, refer to the procedure
Displaying VLAN Information on page 147.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 5 to select Configure VLANS.
3. From the Configure VLANS menu, type 3 to select Delete VLAN.
The Delete a VLAN menu in Figure 41 is displayed.
Figure 41 Delete a VLAN Menu
4. Type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [2 to 4096] ->
5. Enter the VID of the VLAN you want to delete and press Return.
Note
You cannot delete the Default_VLAN, which has a VID of 1.
The specifications of the selected VLAN are displayed. Use this menu
to confirm that you are deleting the correct VLAN.
Allied Telesyn Ethernet Switch AT-8024
Login Privilege: Manager
Delete a VLAN
1 - VLAN ID (VID) ........
R - Return to Previous Menu
Enter your selection?