Allied Telesis AT-S39 - Manual (Page 236)

Section III: Web Browser Management
236
Activating the BOOTP and DHCP Services
For background information on BOOTP and DHCP, refer to the section
Activating the BOOTP and DHCP Services on page 42.
To activate or deactivate the BOOTP and DHCP protocols on the switch
from a web browser management session, perform the following
procedure:
1. From the Home Page, select Configuration.
The Configuration menu is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
General tab.
The General Tab menu is displayed, as shown in Figure 67 on page
233.
3. In the BOOTP/DHCP options in the General tab menu, click either
Enable or Disable.
Note
If you activated BOOTP/DHCP, the switch immediately begins to
query the network for a BOOTP or DHCP server. The switch
continues to query the network for its IP configuration until it
receives a response.