Allied Telesis AT-8350GB - Manual (Page 33)

AT-8350GB Installation Guide
33
Table 8 lists the AT-RPS2004 power supply LEDs.
Type of Connector
The RPS2001 and RPS2004 power supply units feature the 8-pin
connector which connects to the back panel of the AT-8350 GB switch.
The tables below list the 8-pin DIN male and female connector pins and
definitions.
Table 9 lists the 8-pin DIN male connector pins and definitions.
Table 8 AT-RPS2004 Power Supply LEDs
LED State Description
Power Status
RPS Flashing Green RPS power is on standby.
Green RPS power is ON and switch is connected
to it.
Red RPS power failed.
Fan Status
FAN Green Fan power is ON.
Red Fan power failed.
Table 9 Pin Definition of the 8-pin DIN Male Connector (switch side)
Male 8-pin DIN Connector Pin Definition
1 GND
2 RPS_Present
3 12 volts
4 12 volts
5 12 volts
6 SW_Present
7 GND
8 GND
(1)
(2)
(3)
(4)
(5)
(7)
(6)
(8)
MALE