Hubbardton Forge 206730D - Manual (Page 2)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge ® . All rights reserved.
28862
Installation Instructions
To Mount Fixture to Wall & Install Glass (Figure 1)
(Continued)
6. Slide glass (A) down into fixture, positioned between the
bent brackets (C & I) and textured bar (D), until it rests on
the support bar (J). It may be necessary to rotate one or
both adjusting nuts (B & H) clockwise for glass to fit.
7. Rotate bottom adjusting nut (H) counter clockwise until
glass (A) is snug against textured bar (D). Do not over
tighten as glass may crack. Rotate top adjusting nut (B)
counter clockwise until glass (A) is snug. Do not over
tighten.
8. Restore electricity at main breaker.
B301
Forged Vertical Bar, LED 206729D & 206730D Page 2 of 2