Hubbardton Forge 204790 - Manual (Page 2)

Installation Instructions
B198
For Sconce 20-4790 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 23985
To Install Glass (Figure 2)
Component Parts
E Socket
F Bulb
(Included)
G Glass
H Glass
Spring Clip
I Wireway
J Forged Front Plate
1. Install light bulb (F). Be careful not to touch bulb with bare hands; oil
from the hands will dramatically reduce bulb life.
2. Slip glass (G) with slot pointing down through forged front plate until
it engages with glass spring clip (H).
3. Pull glass (G) slightly forward to clear bottom of the forged plate.
Align slot in glass (G) so it slips onto wireway (I).
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)