Hubbardton Forge 204507 - Manual (Page 2)

Installation Instructions
B245
Tapered Pierced with Shade 20-4507 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 26951
To Install Shade (Figure 2)
Component Parts
D Fixture Assembly
F Socket
G Shade
H Retaining
Ring
1. Remove retaining ring (H) from socket (F). Retaining
ring ships installed.
2. Slip shade (G) over socket (F).
3. Thread retaining ring (H) onto socket (F) and tighten
against shade (G). Do not over tighten.
4. Install light bulb. (Not Included)
5. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)