Hubbardton Forge 205320 - Manual (Page 2)

Installation Instructions
B268
Calla Sconce 20-5320 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 27239
To Install Shade (Figures 2 & 3)
Component Parts
G Socket
H Glass
Spacer
I Retaining Ring
J Glass
1. To prepare fixture; remove glass spacer (H) and retaining ring (I) from socket (G) (spacer and ring ship
installed). Retain for later use (Figure 2).
2. Install light bulbs (not included).
3. Slip glass (J) and glass spacer (H) over socket (G). Thread retaining ring (I) onto socket and tighten against glass
spacer (H) (Figure 3).
Note: Be sure not to over tighten.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2) (Figure 3)