Hubbardton Forge 126709 - Manual

Glass Installation Instructions
A52
For Flush Mount Pendants Page 1 of 2
Please see reverse side for Fixture Installation Instructions.
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
To Install Glass
1. Attach decorative cage to glass, if applicable. Refer to the appropriate diagram:
• Model 124402: Place the glass into the ring assembly and secure by threading the three screws
over the edge of the glass.
• Model 126706: Place the leaf assembly down over the neck of the glass.
• Model 126709: Attach the two halves of the leaf assembly together around the neck of the glass
and secure with two ball screws.
2. To attach the glass to the fixture, insert the neck of the glass into the fixture and secure by tightening the
three or four retaining screws against the glass.
(continued)
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 15658