Hubbardton Forge 126740 User Manual

A278, Installation instructions

Advertising
background image

Installation Instructions

A278

For Semi-Flush 12-6740

Page 1 of 2

Hand-Forged,

Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26636

To Install Fixture

(Figure 1)

Component Parts

A Canopy
B Cross

Bar

C Threaded Stud (2)
D Knurled Balls (2)
E Ground

Screw

Caution: Be sure power is off at the main
breaker box prior to installation

1. Thread studs (C) through appropriate

holes in cross bar (B) to match hole
centers in canopy (A). Move ground
screw (E) to another available threaded
hole if necessary.

2. Using two machine screws (not

provided) fasten cross bar (B) to the
electric box using outer oval holes to
orient fixture to desired hanging
position.

Note: A new electric box comes with
screws. When replacing an existing
fixture, retain the screws for use with the
new fixture.

3. Using suitable wire connectors (not

provided); connect fixture wires to
supply wires (white to white and black to
black). Run a pigtail lead from crossbar
ground screw (E) to the function box and
connect all ground wires (Bare copper or
green to bare copper or green).

Caution: Make sure wire connectors are
twisted on securely, and no bare wire is
exposed.

4. Slide fixture canopy (A) over threaded

studs and push firmly to ceiling, making sure that no wires are pinched between fixture canopy and ceiling. Fasten
with knurled balls (D). Be sure studs (C) are fully seated in knurled balls (D)





(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Advertising