Hubbardton Forge 306008 - Manual (Page 2)

Installation Instructions
B215
For Tourou Outdoor Sconce 30-6006, 30-6006F, 30-6007, 30-6007F, 30-6008 & 30-6008F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24851 Rev B
To Install Glass (Figure 3)
Component Parts
F Retaining Ring
G Glass
H Socket
I White
Washer (Not needed on Products 30-6006 & 30-6006F)
1. Remove retaining ring (F) from socket (H). Retaining Ring is shipped
installed.
2. Place glass (G) over socket (H).
3. Slip white washer (I) onto socket (H) until it rests on top of glass (G).
(Note: Washer is not needed on products 30-6006 & 30-6006F).
4. Replace retaining ring (F) and tighten until snug against white washer (I)
or top of glass depending on product being installed to secure glass. Do
not over-tighten.
5. Install light bulb. (“F” version bulb is included)
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)