Hubbardton Forge 305995 - Manual (Page 2)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge ® . All rights reserved.
22253 B
Installation Instructions
To Install Fixture to Wall (Figure 3)
(Continued)
4. Apply a generous bead of a suitable caulking material to
caulking lip (H) on the fixture (Figure 2).
5. Carefully tuck all wires behind the fixture, place fixture firmly
against the wall and fasten with 8-32 screws (E). To ensure
a water tight seal, apply a thin bead of caulking around en
tire perimeter of the fixture.
To Install Glass (Figure 3)
Component Parts
A Fixture
I Glass Top
J Thumb Screw (2)
K Glass
1. Install light bulb. (Fluorescent fixtures are supplied with
bulb.)
2. Slide glass (K) into fixture (A).
3. Remove the two thumb screws (J) from fixture (A).
4. Attach glass top (I) onto fixture (A) with two thumb screws
(J). Do not tighten thumb screws at this point.
5. Adjust glass top (I) until it rests on top of glass (K).
6. Tighten by hand thumb screws (J) until snug against glass
top (I). (Be careful not to over tighten)
7. Restore electricity at the main breaker.
B158
For Outdoor Sconces 305995 & 305995F Page 2 of 2
(Figure 3)
J
I
K
A