Blodgett DFG-50 - Manual (Page 16)

14
Installation
Electrical Connection
Wiring diagrams are located in the motor access panel
and on the back of the oven.
This oven is supplied for connection to 115 volt grounded
circuits. The electric motor, indicator lights and related
switches are connected through the 6’ electric supply cord
found at the rear of the oven.
The Blodgett Oven Company cannot assume respon-
sibility for loss or damage suffered as a result of im-
proper installation.
WARNING!!
This appliance is equipped with three prong
grounding type plug for your protection
against shock hazard and should be plugged
directly into a properly grounded three prong
receptacle. DO NOT cut or remove the ground-
ing prong from this plug.
ELECTRICAL SPECIFICATIONS
hz Volts Phase Amps Electrical Connection
(minimum size)
U.S. and Canadian Installations
60 115 1 5 Cord set provided
Australia and General Export Installations
50 220-240 1 3 Size per local code