Blodgett BPBB SERIES - Manual (Page 18)

P/N 3000012219 REV. A Page 18
Convection Oven
BEFORE LIGHTING PILOT LIGHT FOR OVEN LIGHT ALL PILOTS FOR TOP
BURNERS
1. Remove the oven kick plate.
2. Turn the master power switch to ON. (The light between the toggle switches
will glow indicating that the re-igniter is ON.)
3. Turn the oven gas valve to OFF.
Figure 17: Convection Oven Gas Valve Location
4. Turn the oven thermostat to OFF.
5. Push and hold down the red button on the pilot valve, the electronic ignition
will light the pilot light. Continue to hold down the red button for 30 seconds
until the pilot light remains on when the red button is released.
6. Be sure that oven door is closed.
7. Set rocker switch to AUTO.
8. Turn the thermostat to the desired temperature setting. Turn oven gas valve
to ON. The oven will light and the convection fan will run.
9. Turn the oven gas valve to OFF.
10. Verify that pilot light is still on.
11. Reinstall the oven kick plate.