Audiovox Rampage AV-455 User Manual

Page 7

Advertising

LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select

the Balance mode by pressing the Select button

so the “BA” indication appears on the display panel.

Within 5 seconds of choosing the Balance mode,

turn the Level control

counter-clockwise to adjust

the stereo balance to the left channel speakers or

clockwise to adjust it to the right channel speakers.

The balance position will be shown on the display

panel from “BA L

” (full left) to “BA R

” (full right).

When the volume level between the left and right

speakers is equal, “BA

” will be shown on the

display panel. The display will automatically return

to the normal indication 5 seconds after the last

adjustment or when another function is activated.

FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select

the Fader mode by pressing the Select button

the “FA” indication appears on the display panel.

Within 5 seconds of choosing the Fader mode, turn

the Level control

counter-clockwise to adjust the

front-rear speaker balance to the rear speakers or

clockwise to adjust it to the front speakers. The fader

position will be shown on the display panel from

“FA R

” (full rear) to “FA F

” (full front). When the

level between the front and rear speakers is equal,

“FA

” will be shown on the display panel. The

display will automatically return to the normal

indication 5 seconds after the last adjustment or

when another function is activated.

AUDIO EQUALIZER SELECTOR (EQ)

The Audio Equalizer feature adjusts the frequency

response, allowing you to tailor the sound

reproduction to 3 different acoustic settings. Each

press of the button will select a different effect

(

R O C K

CLAS

P O P

) as shown by the

indication on the display panel. Pressing the button

again will restore normal stereo reproduction (

FLAT

indication on the display panel).

LOUDNESS CONTOUR (LOUD)

When listening to music at low volume levels, this

feature will boost the bass and treble ranges to

compensate

for

the

characteristics

human

hearing.

Press

the

button

momentarily

activate

this

feature

and

the

indication

“LOUD”

will

appear

the

display

panel. Pressing the button again momentarily will

deactivate the feature (the “LOUD” indication will

disappear from the display panel).

128-5504

7 of 12

OPERATING

INSTRUCTIONS

OPERATING

INSTRUCTIONS

OPERATING

INSTRUCTIONS

OPERATING

INSTRUCTIONS

OPERATING

INSTRUCTIONS

AUDIO MUTE SELECTOR (MUTE)

Press this button momentarily to mute the volume

from the system (“MUTE” will flash on the display

panel). Pressing the button again or adjusting the

Volume control

will return to the volume level

setting in use before the Mute function was

activated.

AM/FM BAND SELECTOR (BAND)

RADIO MODE SELECTOR

Each time this button is pressed, the radio band is

changed. The indications “AMI”, “AMII”, “FMI”, “FMII”

or “FMIII” will appear in the display panel according to

your selection.

During cassette play, pressing this button will return

to radio operation.

MANUAL UP/DOWN TUNING (

)

AUTOMATIC SEEK TUNING (SEEK)

To manually select a radio station, momematrily

press the Up Tuning (

) side of the button to

advance

the

unit

one

digit

higher

the

Down

Tuning

(

) side of the button to tune downward.

Pressing either side of the button for longer than 0.5

seconds will activate the Automatic Seek Tuning

function. The radio will seek the next station in the

selected direction and stop at that frequency. The

Seek function can be stopped by pressing the button

again or activating any other tuning function.

LOCAL/DISTANT SELECTOR (LO/DX)

This feature is used to select the strength of the

signals at which the radio will stop during Automatic

Seek Tuning. Pressing the button will select the Local

setting (“LOC” will appear on the display panel) and

only strong (local) stations will be received. Pressing

the button again will select the Distant setting (“LOC”

will disappear from the display panel) and the radio will

stop at a wider range of signals, including weaker

(more distant) stations.

FM MONO/STEREO SELECTOR (MONO)

During FM radio operation, this button is used to

select mono or stereo reception of the broadcast

signal. Under normal reception conditions, the unit

should be left in the stereo mode as indicated by the

“ST” on the display panel and the symbol when

tuned to an FM stereo signal. If the stereo signal is

too noisy for comfortable listening, press the FM

Mono/Stereo Selector button to switch to mono

reception

(the

“ST”

and

indications

will

disappear

Advertising

Popular Brands

Popular manuals