Acer Altos G300 - Manual (Page 75)

63
Event Log Configuration
Note: If there are any event logs recorded, “View Event Log” and
“Mark All Events As Read” will appear. If no event recorded, these
two options will NOT appear.
Parameter Description Options
Event Log
Area The space utilization of event log
NVRAM. If space is full, no new
event type could be record.
Event Log
Data The state of event log data. The
event log data is only available if
‘valid’.
Event
Logging Allow/Not allow logging of events. Enabled
Disabled
ECC Event
Logging Allow/Not allow logging of ECC
events. Enabled
Disabled
Intrusion
Event
logging Allow/Not allow logging of chassis
intrusion events. Enabled
Disabled
BIOS SETUP UTILITY
Advanced
Event Log Configuration
____________________________________________________
Event Log Area: Space Available
Event Log Data: Valid
Event Logging [Enabled]
ECC Event Logging [Disabled]
Intrusion Event logging [Enabled]
Clear Intrusion Status [No]
Clear All Event Logs [No]
View Event Log
Mark All Events As Read
Enabled: Allow logging of
events.
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 ©Copyright 1985-2000, American Megatrends Inc.