Acer Altos G300 - Manual (Page 81)

69
Setup submenu: Power
Parameter Description Options
AC Power
Failure This sets the power state after a
shutdown due to an unexpected
interrupt of AC power. If the value is
set to “Stay OFF,” the system
remains turned off. If the value is set
to “Last State,” the system returns
to the last power state. Last State
Stay Off
Power Button
Mode If this item is set to “On/Off,” the
power button acts as a standard on/
off switch. If you set this item to
“Suspend,” pressing the power
button enters the system into a
power-saving suspend mode. On/Off
Suspend
Enable RTC
Resuming
From S4 Enable or Disable RTC (Real Time
Clock) resume from ACPI S4. If this
option is set to “Enable”, the system
could wake up from ACPI S4
(Hibernation in Windows 2000/.NET)
if O.S. configured properly. Enable
Disable
BIOS SETUP UTILITY
Main Advanced Power Boot Security Exit
AC Power Failure [Last State]
Power Button Mode [On/Off]
Enable RTC Resuming From S4 [Enabled]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 ©Copyright 1985-2000, American Megatrends Inc.