Spektrum SPM20220 DX2.0 - Manual (Page 9)

16 17
Model Select
(System Mode)
The DX2.0 has memory for two models. This feature allows for two different models to be
operated with the same transmitter (additional receivers and servos must be purchased
separately) or one model with two different race setups.
Accessing the model Select Function
1. Press the SCROLL and CHANNEL keys at the same time and hold.
2. Turn the transmitter power switch on to enter System Mode.
3. If MDL does not appear on the screen, press the SCROLL key until MDL appears.
4. Press the
INCREASE or DECREASE key to select the desired model number
(1 or 2).
5. Press the SCROLL key to access the Model Name Entry Function.
6. To exit the System Mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
MDL
I
Model Select Function
- -
Model Number
The DX2.0 allows a three-character name to be input for each of the two (2) models available.
The current model, with name, will then be displayed in the Normal display screen. This
feature is useful to help identify different models, setups, etc. For information on selecting
models 1 or 2, please refer to the Model Select Function (page 16).
Accessing the model Name Entry Function
To access the Model Name Entry function, follow the steps below:
1. Press the SCROLL and CHANNEL keys at the same time and hold.
2. Turn on the transmitter power switch to enter the System Mode.
3. Press the
SCROLL key until MD1 appears on the screen with the first character
flashing.
4. Press the INCREASE or DECREASE key to select the correct letter/number for the first
character (flashing).
5. To change the remaining two characters, press the CHANNEL key until the desired
character to be changed is flashing.
6. Press the SCROLL key to access the Grip Button C function.
7. To exit the System Mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
The Grip Button C function of the DX2.0 allows you to activate the Emergency Steering
function. This function allows you to override the steering dual rate giving maximum travel,
which is useful in oval racing. Use the information below to select the correct Grip Button C
assignment for your particular installation.
Accessing the model Name Entry Function
1. Press the SCROLL and CHANNEL keys at the same time and hold.
2. Turn on the transmitter power switch to enter the System Mode.
3. Press the
SCROLL key until GBC appears on the screen.
4. Press the INCREASE or DECREASE key to select the correct Grip Button C function
type to be used.
5. Press the SCROLL key to access the Data Reset function.
6. To exit the System Mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
Model Name
Entry
(System Mode)
MDI
I
- -
Grip Button C
Function
Select
(System Mode)
Flashing character indicates
the character to be adjusted
Current Model Number
0
GBC
Grip Button C is inhibited
Grip Button C Function
E6
GBC
Emergency Steering Button
is activated