Spektrum SPM2020 DX2 - Manual (Page 18)

18
To enter the function mode, it’s necessary to first turn on the transmitter’s power switch. Next,
press the MODE key until a beep is heard. The display will change to show the first function
listed on the Function Mode flow chart as shown below. Press the MODE key to scroll down
through the functions one by one, as shown in the flow chart. Once the desired function has
been reached, use the channel key to select the appropriate channel (if applicable). To adjust
the values of the function, simply press the INCREASE (+) or DECREASE (-) keys until the
desired value is displayed on the screen.
Accessing
the Function
Mode
Mode Key Channel Key
md1
1
str
100
fwd
100
stm
100
%
st
0
th
0
st th
TRV ADJ. TRV ADJ.
SB-TRM SB-TRM
REV • NORM REV • NORM
Channel
Key
Channel
Key
Channel
Key
D/R
– –
–
- -
- -
–
–
–
–