Dsm technology, Dsmx technology, Receiver compatibility – Spektrum SPMR55201 DX5e User Manual

Page 6: Installing the transmitter batteries

Advertising
background image

6

SPEKTRUM DX5e • RADIO USER’S GUIDE

EN

DE

FR

IT

DSM TECHNOLOGY

Your DX5e transmits on the 2.4GHz band and utilizes

DSM™ Digital Spread Spectrum Modulation, giving

beyond-visual range in all types and sizes of aircraft. Unlike

conventional narrow band systems, Spektrum’s 2.4GHz

digital technology is virtually immune to internal and

external radio interference.

Included with your DX5e is an AR600 6-channel full range

sport receiver.

DSMX TECHNOLOGY

DSMX technology can be turned on and off with this

transmitter. The default is for DSMX technology to be turned

on. When it is on, the transmitter will bind to standard

DSM2 receivers and DSMX receivers. The only time DSMX

technology must be turned off is to bind to high-speed

11ms 2048 DSM2 receivers.

DSMX ON:

Hold the trainer switch and push and hold the Elevator

trim button forward. Turn on the transmitter. A series of

ascending tones should be heard. Release switches.

DSMX cannot be turned on if France Mode is set. See page

12 for more information on France Mode.

DSM2 ON:

Hold the trainer switch and pull and hold the Elevator

trim button backward. Turn on the transmitter. A series of

descending tones should be heard. Release switches.

RECEIVER COMPATIBILITY

The DX5e is compatible with all current Spektrum

and JR

®

brands of DSM

®

aircraft receivers. However, when using the

DX5e with one of the Spektrum park flyer receivers, like the

AR6115, AR6115e, etc., it is imperative that these receivers

be limited to flying Park flyer-type aircraft.

Note: The DSMX DX5e is compatible with all current

Spektrum DSM2 and DSMX aircraft receivers, but NOT

compatible with the original DSM AR6000 receiver.

For current receiver compatibility information, go to

www.spektrumrc.com.

INSTALLING

THE TRANSMITTER BATTERIES

The DX5e requires 4 heavy-duty or alkaline AA batteries.

BATTERY INSTALLATION

Remove the battery door and install 4 AA batteries. Make

sure the polarity of each corresponds with the diagram in the

battery holder. Replace the battery door.

Advertising
This manual is related to the following products: