Spektrum SPM3100 DX3R - Manual (Page 15)

15 SPEKTRUM DX3R PROGRAMMING GUIDE
Model naMe
Model
Name
Name:
Model 01 ◊
≤
To aCCess The
Model naMe funCTIon:
In the Model screen, use the roller to highlight
the Name function. A box will surround the Select
function.
Press the roller to access the Name function. The
above screen will appear.
Use the roller to select the desired model name
character position by placing the cursor below the
desired position.
Press the roller to access that character or number;
then use the roller to change to the desired letter or
number.
Pressing the roller will allow the cursor to be
repositioned to the next field.
To return to the Main screen, press and hold the
roller for more than three seconds. You can also use
the roller to select the back arrow.