Nikon 35mm-f-14G-AF-S-Nikkor - Manual (Page 16)

16
Jp
En
De
Fr
Es
Sv
Ru
Nl
It
Cz
Sk
Ro
Ua
Ck
Ch
Kr
■ Built-in Flash Units
When using the built-in flash on cameras equipped with a
built-in flash unit, shoot at ranges of 0.6 m (2 ft.) or more and
remove the lens hood to prevent vignetting (shadows created
where the end of the lens obscures the built-in flash).
* N-series cameras sold in U.S.A. only.
■ The Lens Hood
The lens hoods protects the lens and blocks stray light that
would otherwise cause flare or ghosting.
When attaching or removing the hood, hold it near the
symbol on its base and avoid gripping it too tightly.
Vignetting may occur if the hood is not correctly attached.
The hood can be reversed and mounted on the lens when not in
use. When the hood is reversed, it can be attached and
removed by rotating it while holding it near the lock mark (
—{
).
Camera Use at ranges of
F60-series/N60
*
, F/N65-series
* 1.5 m/4 ft. 11 in. or more
F50-series/N50
* 3.0 m/9 ft. 10 in. or more
F/N55-series
* 2.0 m/6 ft. 7 in. or more
F-401x/N5005
*
, F-401s/N4004s
*
, F-401/N4004
* Lens causes vignetting at all ranges
Align the lens hood lock mark (— { ) with the
lens hood mounting mark (●) on the lens (e).