Alpine INA-W910 - Manual (Page 102)

102
-EN
Setting the iPod Control
When an iPod/iPhone is connected, you can choose to operate it from
this unit or from its own controls.
Touch and hold or for at least 2 seconds on
the iPod main screen to switch iPod control mode
between this unit and iPod/iPhone.
Once the control mode is changed, this will set pause status,
touch [
/ ] to continue.
• When using the iPod control mode, make sure the USB 30P cable is
connected to the iPod(V)/AUX Input Connector correctly by using the
AV extension cable.
• In the iPod control mode, if nothing is played back by the iPod,
“Stop” will be displayed on this unit.
• Depending upon the iPod used, iPod control may not be selectable.
Or, if iPod is selected, operation must still be from the head unit.
Playback
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [iPod].
The display shows the iPod mode screen.
3
Touch [ ] or [ ] to select the desired song.
Return to the beginning of the current song:
Touch [ ].
Fast backward the current song:
Touch and hold [ ].
Advance to the beginning of the next song:
Touch [ ].
Fast forward the current song:
Touch and hold [ ].
4
To pause playback, touch [ / ].
Touching [ / ] again will resume playback.
• If a song is playing on the iPod/iPhone when it is connected to the
INA-W910, it will continue playing after the connection.
• An episode may have several chapters. The chapter can be changed
by pressing [ ] or [ ].
• Display mode can be changed by touching [WIDE] when an iPhone
or iPod compatible video is connected. For details, refer to
“Switching Display Modes” (page 55).
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
INA-W910. Therefore, a maximum of 250 characters is
recommended. The maximum number of characters for the head unit
is 128 (128 byte).
• Some characters may not be correctly displayed.
• “No Support” is displayed when text information is not compatible
with the INA-W910.
• If the audio source is switched to Pandora during playback of video
file in iPod/iPhone, playback will start from the beginning when the
source is switched to iPod video again.
Searching for a desired Song
An iPod/iPhone can contain hundreds of songs. By keeping these songs
organized in playlists, the INA-W910 can use these to ease song
searches.
Using the search mode’s individual hierarchy, you can narrow down
your search as shown in the table below.
<MUSIC Search Menu>
• Video search mode depends on the iPod/iPhone. If the specification
of the iPod/iPhone is changed, the search mode on this unit will also
be changed.
For example: Searching by Artist name
The following example explains how an ARTISTS search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
: Switch the iPod control to iPod/iPhone.
Operate the iPod/iPhone using its own controls.
When iPod is selected, some functions will not be
operable via the head unit.
: Switch the iPod control to this unit.
Operate the iPod/iPhone via this unit.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlists Songs — —
Artists* Albums* Songs —
Albums* Songs — —
Songs — — —
Podcasts Episodes — —
Genres* Artists* Albums* Songs
Composers* Albums* Songs —
Audiobooks — — —