Alpine INA-W910 - Manual (Page 92)

92
-EN
This operation can be performed only when the gear lever is in the
reverse position (R).
Make sure view change function is set to ON (page 66).
1
Touch any area of the screen to display the view
change function keys.
2
Touch [Back] for three times.
The volume adjustment screen appears.
3
Touch [Back] again.
The sensitivity adjustment screen appears.
4
Touch [Panorama] to switch a desired detection
sensitivity level.
Touching the button toggles the volume level.
5
Touch [ ] to return to normal mode.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to the
INA-W910 if it is Ai-NET compatible. With a CD Changer connected
to the Ai-NET input of the INA-W910, the CD Changer will be
controllable from the INA-W910.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the
INA-W910.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the INA-W910.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 93).
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [CD CHG.].
The display changes to the CD changer mode screen.
When a 6 Disc CD Changer is connected;
1 Touch [P1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is
displayed.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [P1/3] twice to change the Function Guide display.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [P1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that DISC 7
through DISC 12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA/AAC section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the INA-W910 as
well as the CD changer.
Adjusting Detection Sensitivity
(HCE-C300R only)
Low: Detects mainly moving objects.
Almost no motionless objects are
detected.
High: Detects moving objects and motionless
objects.
Display example for sensitivity adjustment screen
Changer
(Optional)