Nikon P300 - Manual (Page 165)

153
Setup Menu
Basi
c Came
ra Setup
Sound Settings
Adjust the following sound settings.
B
Notes on Sound Settings
• In Pet portrait scene mode, even when On is set, the button sound and shutter sound are
disabled.
• Even when On is set, the shutter sound is disabled during continuous shooting or movie recording.
Auto Off
If no operations are performed for a certain period while the camera is on, the
monitor is turned off to save power and the camera enters standby mode (
A19).
This option sets the amount of time allowed to elapse before the camera enters
standby mode.
Choose from 30 s, 1 min (default setting), 5 min and 30 min.
C
When the Monitor Is Turned Off to Save Power
• The power-on lamp blinks in standby mode.
• The camera turns off when the standby mode continues for about three minutes.
• When the power-on lamp blinks, turn on the monitor again with one of the following operations.
- Press the power switch, shutter-release button, the c button or the b (e movie-record)
button.
- Rotate the mode dial.
B
Auto Off Setting
In the following situations, the time taken for the camera to enter standby mode is fixed.
• When menus are displayed: three minutes (when auto off is set to 30 s or 1 min)
• During slideshow playback: maximum of 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes
Press the d button M z (Setup menu) (A142) M Sound settings
Button sound
Turn the beep and start-up sounds On (default setting) or Off. The beep sounds
once when the settings are completed successfully, twice when the camera
focuses on the subject, and three times when an error is detected.
Shutter sound
Choose whether to set the shutter sound to On (default setting) or Off.
Press the d button M z (Setup menu) (A142) M Auto off