Using the self-timer, A62), Press the multi selector – Nikon P7800 User Manual

Page 82

Advertising
background image

62

Sh
ooting Fea

tures

Using the Self-timer

The camera is equipped with a self-timer that releases the shutter about
10 seconds, 2 seconds or 1 second after you press the shutter-release button. Set
Vibration reduction to Off in the setup menu (

A99) when using a tripod to

stabilize the camera during shooting.

1

Press the multi selector

J

(

n

).

2

Select

n10s (or n2s, n1s), and

press the

k button.

To change the time for self-timer, press

K

before pressing the

k button.

n10s (10 seconds): Use on important
occasions, such as weddings.

n2s (2 seconds), n1s (1 second): Use to
prevent camera shake.

If a setting is not applied by pressing the

k button within a few seconds, the

selection will be canceled.

When the shooting mode is Pet portrait scene mode, Y (pet portrait auto

release) is displayed (

A45). The self-timer cannot be used.

3

Frame the picture and press the shutter-release button
halfway.

Focus and exposure are set.

4

Press the shutter-release
button the rest of the way
down.

Countdown starts. The self-timer

lamp flashes and then glows
steadily about one second before
the shutter is released (except
when

n1s is set).

When the shutter is released, the

self-timer is set to OFF.

To stop the countdown, press

the shutter-release button again.

Self-timer

9

9

Advertising