Nikon 900 - Manual (Page 19)

- 19 - First Steps: Using the AC Adapter
Using the AC Adapter
An AC adapter is available separately for the COOLPIX 900.
When connecting the AC adapter, first make sure that the
camera is off. Plug the power cable into the AC adapter. Then
open the door which covers the DC IN and VIDEO OUT
connectors and insert the power jack into the connector la-
beled DC IN.
VIDEO OUT DC IN 6.5V
DIGTAL CAMERA
M RE C A OF F
QU ALITY
PL AY
1
2
3
Plug the power cable into a power outlet. You are now ready
to turn the camera on.
Caution: Use only the cable provided with your EH-30.
Depending on the country of purchase, the cable provided will be
rated for power sources of 100–120V or 220–240V. Be sure to
use a power source appropriate to the cable provided in your
country or region. Using another cable or incorrect voltage could
result in fire or electric shock.
When operating the camera with the AC adapter, take care
that the camera does not accidentally become unplugged. Do
not carry the camera from one place to another while it is
connected to the adapter.
Caution: The adapter is for indoor use only. Use batteries
when operating the camera out of doors.
When leaving the camera unattended, unplug the power cord
from the outlet, then unplug the adapter from the camera and
remove the power cable from the adapter. Unplug the power
cord by pulling by the plug, not by tugging on the cable. Pulling
on the cable rather than the plug could damage its protective
insulation, leading to fire or electric shock.
* The shape of the power cable
depends on the country of purchase